Huawei/E3276/22.260.05.01.56/

This software is the default software on Tele2 Sweden branded devices.

22 = Huawei HiSilicon HiLink

VID:PID	State	Function	How to activate	Remark
12d1:1f01	Cold	USB Storage	(Cold state)
12d1:14db	HiLink	HiLink (web server)	USB Modeswitch
12d1:1442	Project	Modem (project mode)	http://192.168.1.1/html/switchProjectMode.html
12d1:1556	Debug	Modem (debug mode)	http://192.168.1.1/html/switchDebugMode.html

Storage only mode:

T:  Bus=01 Lev=04 Prnt=04 Port=03 Cnt=01 Dev#= 18 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1f01 Rev= 1.02
S:  Manufacturer=HUAWEI Technology
S:  Product=HUAWEI Mobile
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

HiLink mode:

T:  Bus=01 Lev=04 Prnt=04 Port=03 Cnt=01 Dev#= 19 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=14db Rev= 1.02
S:  Manufacturer=HUAWEI Technology
S:  Product=HUAWEI Mobile
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

Project mode:

T:  Bus=01 Lev=04 Prnt=04 Port=03 Cnt=01 Dev#= 20 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1442 Rev= 1.02
S:  Manufacturer=HUAWEI Technology
S:  Product=HUAWEI Mobile
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=02(comm.) Sub=02 Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=02(comm.) Sub=02 Prot=ff Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

Debug mode:

T:  Bus=01 Lev=04 Prnt=04 Port=01 Cnt=01 Dev#= 10 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1566 Rev= 1.02
S:  Manufacturer=HUAWEI Technology
S:  Product=HUAWEI Mobile
C:* #Ifs= 8 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=02(comm.) Sub=02 Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=02(comm.) Sub=02 Prot=ff Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=02(comm.) Sub=02 Prot=ff Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=02(comm.) Sub=02 Prot=ff Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=02(comm.) Sub=02 Prot=ff Driver=option
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=02(comm.) Sub=02 Prot=ff Driver=option
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

Compilation of AT commands

Kod	Beskrivning	Project AT	Project AT ?	Project AT =?	Debug AT	Debug AT ?	Debug AT =?
A	B	C	D	E	F	G	H
A
D	Dial
E	Echo Command
H	Hang Up Call
I	Info	Manufacturer: Huawei Model: E3276 Revision: 22.260.05.01.56 IMEI: 863781014794995 +GCAP: +CGSM,+DS,+ES	ERROR	ERROR
P
Q	Set Result Code Presentation Mode
S0
S3	Command Line Termination Character
S4	Response Format Character
S5
S6
S7
T
V
X
Z	Restore Factory Settings
&C	Set Carrier Detection (DCD) Line Mode
&D	Set DTE Ready (DTR) Line Mode
&F	Restore Default AT Command Settings
+CBC		+CBC: 0,0	ERROR	+CBC: (0-3),(0-100)
+CBST		+CME ERROR: 50	+CBST: 134,1,0	+CBST: (134),(1),(0)
+CCFC	Call Forwarding	+CME ERROR: 50	ERROR	+CCFC: (0-5)
+CCUG
+CCWA	Call Waiting
+CEMODE
+CEREG
+CFUN	Set Operation Mode
+CGACT	Activate or Deactivate PDP Context
+CGANS
+CGATT	Attach or Detach PS Domain
+CGAUTO
+CGCLASS
+CGCMOD
+CGCONTRDP
+CGDATA	Enter Data State
+CGDCONT	Define PDP Context
+CGDSCONT
+CGEQMIN
+CGEQNEG	3G Quality of Service Profile (Negotiated)
+CGEQOS
+CGEQOSRDP
+CGEQREQ	3G Requested QoS Profile
+CGMI	Request Manufacturer Identification
+CGMM	Request Model Identification
+CGMR	Request Software Version
+CGPADDR	Show PDP Address
+CGREG	PS Domain Registration Status
+CGSCONTRDP
+CGSMS	SMS Bearer Domain
+CGSN	Request Product IMEI
+CGTFT
+CGTFTRDP
+CHLD	Call Hold
+CHUP	Call Hangup
+CIMI	Request IMSI
+CLAC
+CLCC	List Current Calls
+CLCK	Facility Lock
+CLIP	Calling Line Identification Presentation
+CLIR	Calling Line Identification Restriction
+CLVL
+CMEE	Report Mobile Termination Error
+CMGD	Delete Message
+CMGF	Set Message Format
+CMMS
+CMOD
+CNMI	Indicate New Message to TE
+CNUM	Subscriber Number
+COLP
+COPS	Select Operator
+CPAS
+CPBF
+CPBR	Read Phonebook Entries
+CPBS	Select Phonebook Memory Storage
+CPBW	Write Phonebook Entry
+CPIN	Enter PIN
+CPLS
+CPMS	Select Message Storage
+CPOL
+CPWD	Change Password
+CRC
+CREG	Network Registration
+CRSM	Restricted SIM Access
+CSCA	Service Center Address
+CSCB
+CSCS	Select TE Character Set
+CSDH
+CSIM
+CSMP	Set Text Mode Parameters
+CSMS	Select Messaging Service
+CSQ	Signal Quality
+CSQLVL
+CSSN
+CSTA
+CTZR
+CUSD	USSD Command
+CUUS1
+GCAP
+GMI	Request Manufacturer Identification
+GMM	Request Model Identification
+GMR	Request Software Version
+GSN	Request Product IMEI
+USBSWITCH
+VTS	Send DTMF Tone
^ACPUMEMINFO
^ALS
^ANQUERY
^ANTSTATE
^APBATLVL
^APCONNST
^APCRADETHSTA
^APCRADWIFIBS
^APCURPROF
^APDHCP
^APDIALM
^APDIALMODE
^APFMCDHCPSTA
^APHPLMN
^APLANADDR
^APNDISCON
^APPDIALMODE
^APPDMVER
^APPROFRD
^APPWRONREG
^APRAINFO
^APRPTPORTSEL
^APRPTSRVURL
^APSIMST
^APTHROUGHPUT
^APWIFIBS
^APWIFISEC
^APXMLINFOTYPE
^APXMLRPTFLAG
^AT2OM
^AUTHDATA
^AUTHORITYID
^AUTHORITYVER
^AUTHVER
^BANDSW
^BOOTROMVER
^BSN
^CAATT
^CALLSRV
^CARDLOCK
^CARDMODE	Query SIM/USIM Card Type
^CCC
^CCPUMEMINFO
^CDTMFE
^CDTMFS
^CDUR
^CELLINFO
^CELLSRCH
^CFPLMN
^CGAS
^CGCATT
^CGDNS
^CHDATA
^CHIPTEMP	Query the Temperature of the PA/SIM/Battery/Crystal Oscillator Command
^CIPHERQRY
^CMDLEN
^CMGI
^CMLCK
^CMMT
^CMSR
^COMM
^CPAM
^CPBR
^CPBW
^CPDW
^CPIN	Manage PIN
^CPIN2
^CPNN
^CPWORD
^CQST
^CRPN
^CSASM
^CSDFLT
^CSEN
^CSIN
^CSMN
^CSNR	RSCP and ECIO Query
^CSOS
^CSQLVLEXT
^CSTC
^CSTR
^CSVER
^CURC	Set Presentation of Unsolicited Results
^CWAS
^DATALOCK
^DHCP
^DHCPV6
^DIALMODE
^DISLOG
^DISSD
^DLOADINFO
^DLOADVER
^DNSP	Set the Primary DNS Server Address
^DNSQUERY
^DNSS	Set the Secondary DNS Server Address
^DOCK
^DPACAT
^DSFLOWCLR
^DSFLOWQRY	DS Traffic Query
^DSFLOWRPT
^DTMF
^ECIOCFG
^EONS	Query the Service Provider Name and the EFSPN Information of the SIM Card
^EQVER
^FACAUTHPUBKEY
^FACINFO
^FASTDORM
^FBLK
^FCHAN	Set Non-signaling Channels
^FCHANS
^FCMTMS
^FDAC
^FHVER
^FIPSTART
^FLASHINFO
^FLNA	Set the LNA Level of a Receiver
^FLNAS
^FMAXPOWER
^FPA
^FPAPOWER
^FPAS
^FPDMS
^FPOW
^FPOWS
^FREQLOCK
^FRSSI	Obtain the Current Channel RSSI
^FRSSIS
^FRXON	Enable a Receiver in Non-signaling Mode
^FSEGMENT
^FSTART
^FTXON	Enable the Transmitter in Non-signaling Mode
^FTXWAVE
^FWAVE	Set the Waveform in Non-signaling Mode
^FVCTCXO
^GCFIND
^GETEXBANDINFO
^GETEXBANDTESTINFO
^GETPORTMODE
^GLASTERR
^GODLOAD
^GPIO
^GPIOPL
^GTIMER
^HCSQ	Query and Report Signal Strength
^HS
^HSPA
^HSSPT
^HUK
^HVER
^HWVER
^ICCID	Query the ICCID
^IDENTIFYEND
^IDENTIFYSTART
^IMSICHG
^INFORBU
^INFORRS
^IPV6CAP
^LCSTARTTIME
^LOCINFO
^LTECS
^LTERSRP
^LWCLASH
^MAXLCKTMS
^MDATE
^MEANRPT
^MODE	System Mode Change Indication
^NANDBBC
^NANDVER
^NDISADD
^NDISCONN
^NDISDUP	NDIS-Based Dialing
^NDISSTATQRY	Query the Connection Status
^NVBACKUP
^NVBACKUPSTAT
^NVRD
^NVRESTORE
^NVRSTSTTS
^NVWR
^OPENPORT
^OPL
^OPWORD
^PCSCINFO
^PDPROFMOD
^PDPSTUB
^PFVER
^PHONEPHYNUM
^PHONESIMLOCKINFO
^PHYNUM
^PLATFORM
^PNN
^PORTATTRIBSET
^PORTCTRLTMP
^PORTSEL	Proactive Event Report Port Setting
^PRODNAME
^PRODTYPE
^PSTANDBY
^QOS
^QRYNVRESUME
^RESET	Reset the Module
^RFANT
^RSCPCFG
^RSFR
^RSFW
^RSIM
^RSRPCFG
^RSTRIGGER
^SARREDUCTION
^SCID
^SCPBR
^SCPBW
^SD
^SDLOAD
^SDOMAIN
^SDREBOOT
^SECUBOOT
^SECUBOOTFEATURE
^SETPORT
^SFEATURE
^SFM
^SHELL
^SIMLOCK
^SIMLOCKDATAREAD
^SIMLOCKDATAWRITE
^SIMST
^SN
^SPARA
^SPN
^SPWORD
^SRVST
^SRXMEAS
^SRXSET
^SRXSUBFRA
^SSEGLEN
^SSEGNUM
^SSID
^SSTART
^SSTOP
^SSUBFRAME
^SSYNC
^STGI	Obtaining Command Data
^STGR	STK Responding Command
^STSF	Configure the Mode of STK (Rawdata mode)
^STXBW
^STXCHAN
^STXCHANTYPES
^STXMODUS
^STXPOWS
^STXRBNUMS
^STXRBPOSS
^SYSCFG	System Configuration
^SYSCFGEX	Extended System Configuration Command
^SYSINFO	Query System Information
^SYSINFOEX	Extended System Information Query Command
^TBAT
^TBATVOLT
^TCHRENABLE
^TCHRINFO
^TIME
^TMMI
^TMODE	Set the Operating Mode
^TRIG
^TSCREEN
^TSELRF	Select RF Channel
^U2DIAG
^VERSION
^VERTIME
^WIBAND
^WIDATARATE
^WIENABLE
^WIFIGLOBALMAC
^WIFREQ
^WIINFO
^WIKEY
^WILOG
^WIMODE
^WIPARANGE
^WIPOW
^WIRPCKG
^WIRX
^WITX
^WIWEP
^VMSET
^WUPWD
A	B	C	D	E	F	G	H

&W - Store User Settings ? &V - Query Current Configuration ? +CCLK–Return Current Time of the Module +CGQMIN–Quality of Service Profile (Minimum Acceptable) +CNMA–New Message Acknowledgement +CMGS-Send Short Message +CMGL–List Messages +CMGR–Read Message +CMSS–Send Message from Storage +CMGW–Write Message to Memory ^WAKEUPCFG–Configure Module's Remote Wakeup Function by Host ^MSO–Shutdown Command ^IOCTRL-Control the GPIO ^THERMFUN–Enable or Disable the Temperature Protection Function Command ^IMEISV–Query the IMEISV ^WPDOM–Set Operation Mode (GPS) ^WPDST–Set Session Type (GPS) ^WPDFR–Set Positioning Frequency (GPS) ^WPQOS–Set QoS (GPS) ^WPDGL–Set GPS Session Lock ^GPSTYPE–Query GPS Type ^WGNSS–Set Positioning System (GPS) ^WPURL–Set AGPS Server Address and Port on the WCDMA Network ^WPDGP–Start Positioning Session (GPS) ^SOCKETCONT–Set the AGPS Socket Profile ^WPEND–Terminate Positioning Process (GPS) ^WPDIM–Delete Auxiliary Data (GPS) ^XTRATIME–Inject XTRA Time (GPS) ^XTRADATA–Inject Auxiliary XTRA Data (GPS) ^WNICT–Set NI Response (GPS) ^GNSSCNO- Request GPS CN0 ^PWRCFG–Configure the Maximum Tx Power ^PWRCFGON–Enable the Maximum Tx Power Configuration ^ANTMODE–Set Operation Mode of Main and AUX Antennas ^CUSTNVCLR–Clear Customer Nonvolatile Value

URC: +CMTI - Unsolicitedly Present of Message Arrival Indication ^SMMEMFULL–Message Memory Full ^IMEISV–Query the IMEISV

+CDSI–Unsolicitedly Present of Newly Received Message Status Report +CMT–Unsolicitedly Present of New Message Reported Directly +CDS–Unsolicitedly Present of New Message Status Report Reported Directly ^NDISSTAT–Unsolicited Report of Connection Status ^THERM–Unsolicitedly Present of Thermal Protection Activated ^SRVST–Service State Change Indication ^HWNAT– Indicate Network Mode Change ^SIMST–SIM Card State Change Indication ^TIMESETRULT–Notify XTRA Time Injection (GPS) ^DATASETRULT–Notify XTRA Data Injection (GPS) ^XDSTATUS–Notify XTRA Data Status (GPS) ^POSEND–Report Positioning End Information (GPS) ^WNINV–Notify NI Positioning (GPS) +CRING Indicate incoming call +CSSI Supplementary service notifications +CSSU Supplementary service notifications +CMTI New SMS-DELIVER indication +CMT New message directly deliver indication +CDSI New SMS status report indication +CDS SMS status report indication directly displayed +CUSATP Unsolicitedly report a UICC proactive command +CUSATEND Unsolicitedly report of terminating a UICC proactive command session ^ORIG Indicate the origination of a call ^CONF Ringback tone indication ^CONN Call connection indication ^CEND Call end indication ^IPSTATE Indicate TCP/UDP data link state ^TIMESETRULT Notify XTRA time injection ^DATASETRULT Notify XTRA data injection ^XDSTATUS Notify XTRA data status ^POSITION Notify positioning result ^POSEND Report positioning end information ^WNINV Notify NI positioning +CREG Notify the current registration status +CGREG Notify PS Domain Registration Status ^RFSWITCH Report the RFSWITCH State +XADPCLKFREQINFO Unsolicitedly Present of Adaptive Clock Frequency Info ^SIMST SIM Card State Change Indication ^DSDORMANT Dormant State Indication (CDMA only) ^HWNAT Indicate Network Mode Change ^IPDATA Notificate Arrival Data ^SRVST Service State Change Indication ^THERM Thermal Protection Activated Unsolicited Report ^HCSQ Report system mode and Signal Strength ^HCMT Report a New Short Message(CDMA only) ^HCDS Report a New Status Report Short Message(CDMA only) ^HCMGSS Report Successful Short Message Sending (text mode)(CDMA only) ^HCMGSF Report Short Message Sending Failure(CDMA only) ^HCMGS Unsolicitedly Present of Successfully Sending a Short Message (PDU mode)(CDMA only) ^SYSSTART Unsolicitedly report module startup(Only for the HUAWEI specified client) ^NWTIME Unsolicitedly report network system time(Only for the HUAWEI specified client) ^RSSI RSSI or System Mode Change Indication (be replaced by the URC "^HCSQ") ^MODE RSSI or System Mode Change Indication (be replaced by the URC "^HCSQ") ^RSSILVL RSSI or System Mode Change Indication (be replaced by the URC "^HCSQ") ^HRSSILVL RSSI or System Mode Change Indication (be replaced by the URC "^HCSQ") ^HDRRSSI RSSI or System Mode Change Indication (be replaced by the URC "^HCSQ") ^CRSSI RSSI or System Mode Change Indication (be replaced by the URC "^HCSQ") +CEREG Notify the current LTE registration status ^ANLEVEL (Only for the HUAWEI specified client) ^WPDCP (Only for the HUAWEI specified client) ^NDISEND (Only for the HUAWEI specified client) ^OTACMSG (Only for the HUAWEI specified client) ^NDISSTAT Unsolicited Report of Connection Status ^LOCCHD Unsolicited Report of Connection Status(Only for the HUAWEI specified client) ^DATAVALIDITY (Only for the HUAWEI specified client) ^WPDDL (Only for the HUAWEI specified client) ^BOOT (Only for the HUAWEI specified client) ^STIN (Only for the HUAWEI specified client) ^ECLSTAT (Only for the HUAWEI specified client) ^CSNR (Only for the HUAWEI specified client) ^SIMFILEREFRESH (Only for the HUAWEI specified client) ^WPDOP (Only for the HUAWEI specified client) ^DSFLOWRPT (Only for the HUAWEI specified client) ^ECCLIST (Only for the HUAWEI specified client) ^ACTIVEBAND (Only for the HUAWEI specified client) +CTZV Notify the time zone is changed ^EARST (Only for the HUAWEI specified client) +CBMI New CBM indication +CBM New CBM directly deliver indication ^ERRRPT Specified error code indication(Only for the HUAWEI specified client)