Huawei/E3276/22.260.05.01.56/

This software is the default software on Tele2 Sweden branded devices.

22 = Huawei HiSilicon HiLink

VID:PID	State	Function	How to activate	Remark
12d1:1f01	Cold	USB Storage	(Cold state)
12d1:14db	HiLink	HiLink (web server)	USB Modeswitch
12d1:1442	Project	Modem (project mode)	http://192.168.1.1/html/switchProjectMode.html
12d1:1556	Debug	Modem (debug mode)	http://192.168.1.1/html/switchDebugMode.html

Storage only mode:

T:  Bus=01 Lev=04 Prnt=04 Port=03 Cnt=01 Dev#= 18 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1f01 Rev= 1.02
S:  Manufacturer=HUAWEI Technology
S:  Product=HUAWEI Mobile
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

HiLink mode:

T:  Bus=01 Lev=04 Prnt=04 Port=03 Cnt=01 Dev#= 19 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=14db Rev= 1.02
S:  Manufacturer=HUAWEI Technology
S:  Product=HUAWEI Mobile
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

Project mode:

T:  Bus=01 Lev=04 Prnt=04 Port=03 Cnt=01 Dev#= 20 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1442 Rev= 1.02
S:  Manufacturer=HUAWEI Technology
S:  Product=HUAWEI Mobile
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=02(comm.) Sub=02 Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=02(comm.) Sub=02 Prot=ff Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

Debug mode:

T:  Bus=01 Lev=04 Prnt=04 Port=01 Cnt=01 Dev#= 10 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1566 Rev= 1.02
S:  Manufacturer=HUAWEI Technology
S:  Product=HUAWEI Mobile
C:* #Ifs= 8 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=02(comm.) Sub=02 Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=02(comm.) Sub=02 Prot=ff Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=02(comm.) Sub=02 Prot=ff Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=02(comm.) Sub=02 Prot=ff Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=02(comm.) Sub=02 Prot=ff Driver=option
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=02(comm.) Sub=02 Prot=ff Driver=option
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

Compilation of AT commands

Kod	Beskrivning	Project AT	Project AT ?	Project AT =?	Debug AT	Debug AT ?	Debug AT =?
A	B	C	D	E	F	G	H
A
D	Dial
E	Echo Command
H	Hang Up Call
I	Info	Manufacturer: Huawei Model: E3276 Revision: 22.260.05.01.56 IMEI: 863781014794995 +GCAP: +CGSM,+DS,+ES	ERROR	ERROR
P
Q	Set Result Code Presentation Mode
S0
S3	Command Line Termination Character
S4	Response Format Character
S5
S6
S7
T
V
X
Z	Restore Factory Settings
&C	Set Carrier Detection (DCD) Line Mode
&D	Set DTE Ready (DTR) Line Mode
&F	Restore Default AT Command Settings
+CBC	Battery charge		+CBC: 0,0	ERROR	+CBC: (0-3),(0-100)
+CBST	Select bearer service type	+CME ERROR: 50	+CBST: 134,1,0	+CBST: (134),(1),(0)
+CCFC	Call forwarding number and conditions	+CME ERROR: 50	ERROR	+CCFC: (0-5)
+CCUG	Closed user group
+CCWA	Call Waiting
+CEMODE	UE modes of operation for EPS
+CEREG	EPS network registration status
+CFUN	Set phone functionality Set Operation Mode
+CGACT	Activate or Deactivate PDP Context
+CGANS	Manual response to a network request for PDP context activation
+CGATT	PS attach or detach
+CGAUTO	Automatic response to a network request for PDP context activation
+CGCLASS	GPRS mobile station class
+CGCMOD	PDP context modify
+CGCONTRDP	PDP context read dynamic parameters
+CGDATA	Enter Data State
+CGDCONT	Define PDP Context
+CGDSCONT	Define secondary PDP context
+CGEQMIN	3G quality of service profile (minimum acceptable)
+CGEQNEG	3G Quality of Service Profile (negotiated)
+CGEQOS	Define EPS quality of service
+CGEQOSRDP	EPS quality of service read dynamic parameters
+CGEQREQ	3G quality of service profile (requested)
+CGMI	Request Manufacturer Identification
+CGMM	Request Model Identification
+CGMR	Request Software Version
+CGPADDR	Show PDP Address
+CGREG	PS Domain Registration Status
+CGSCONTRDP	Secondary PDP context read dynamic parameters
+CGSMS	Select service for MO SMS messages
+CGSN	Request product serial number identification
+CGTFT	Traffic flow template
+CGTFTRDP	Traffic flow template read dynamic parameters
+CHLD	Call related supplementary services
+CHUP	Hangup call
+CIMI	Request IMSI
+CLAC	List all available AT commands
+CLCC	List current calls
+CLCK	Facility lock
+CLIP	Calling Line Identification Presentation
+CLIR	Calling Line Identification Restriction
+CLVL	Loudspeaker volume level
+CMEE	Report Mobile Termination Error
+CMGD	Delete Message
+CMGF	Set Message Format
+CMMS
+CMOD	Call mode
+CNMI	Indicate New Message to TE
+CNUM	Subscriber Number
+COLP	Connected line identification presentation
+COPS	Select Operator
+CPAS	Phone activity status
+CPBF	Find phonebook entries
+CPBR	Read phonebook entries
+CPBS	Select Phonebook Memory Storage
+CPBW	Write Phonebook Entry
+CPIN	Enter PIN
+CPLS	Selection of preferred PLMN list
+CPMS	Select Message Storage
+CPOL	Preferred PLMN list
+CPWD	Change password
+CRC	Cellular result codes
+CREG	Network Registration
+CRSM	Restricted SIM Access
+CSCA	Service Center Address
+CSCB
+CSCS	Select TE Character Set
+CSDH
+CSIM	Generic SIM access
+CSMP	Set Text Mode Parameters
+CSMS	Select Messaging Service
+CSQ	Signal Quality
+CSQLVL
+CSSN
+CSTA
+CTZR
+CUSD	USSD Command
+CUUS1
+GCAP
+GMI	Request Manufacturer Identification
+GMM	Request Model Identification
+GMR	Request Software Version
+GSN	Request Product IMEI
+USBSWITCH
+VTS	Send DTMF Tone
^ACPUMEMINFO
^ALS
^ANQUERY
^ANTSTATE
^APBATLVL
^APCONNST
^APCRADETHSTA
^APCRADWIFIBS
^APCURPROF
^APDHCP
^APDIALM
^APDIALMODE
^APFMCDHCPSTA
^APHPLMN
^APLANADDR
^APNDISCON
^APPDIALMODE
^APPDMVER
^APPROFRD
^APPWRONREG
^APRAINFO
^APRPTPORTSEL
^APRPTSRVURL
^APSIMST
^APTHROUGHPUT
^APWIFIBS
^APWIFISEC
^APXMLINFOTYPE
^APXMLRPTFLAG
^AT2OM
^AUTHDATA
^AUTHORITYID
^AUTHORITYVER
^AUTHVER
^BANDSW
^BOOTROMVER
^BSN
^CAATT
^CALLSRV
^CARDLOCK
^CARDMODE	Query SIM/USIM Card Type
^CCC
^CCPUMEMINFO
^CDTMFE
^CDTMFS
^CDUR
^CELLINFO
^CELLSRCH
^CFPLMN
^CGAS
^CGCATT
^CGDNS
^CHDATA
^CHIPTEMP	Query the Temperature of the PA/SIM/Battery/Crystal Oscillator Command
^CIPHERQRY
^CMDLEN
^CMGI
^CMLCK
^CMMT
^CMSR
^COMM
^CPAM
^CPBR
^CPBW
^CPDW
^CPIN	Manage PIN
^CPIN2
^CPNN
^CPWORD
^CQST
^CRPN
^CSASM
^CSDFLT
^CSEN
^CSIN
^CSMN
^CSNR	RSCP and ECIO Query
^CSOS
^CSQLVLEXT
^CSTC
^CSTR
^CSVER
^CURC	Set Presentation of Unsolicited Results
^CWAS
^DATALOCK
^DHCP
^DHCPV6
^DIALMODE
^DISLOG
^DISSD
^DLOADINFO
^DLOADVER
^DNSP	Set the Primary DNS Server Address
^DNSQUERY
^DNSS	Set the Secondary DNS Server Address
^DOCK
^DPACAT
^DSFLOWCLR
^DSFLOWQRY	DS Traffic Query
^DSFLOWRPT
^DTMF
^ECIOCFG
^EONS	Query the Service Provider Name and the EFSPN Information of the SIM Card
^EQVER
^FACAUTHPUBKEY
^FACINFO
^FASTDORM
^FBLK
^FCHAN	Set Non-signaling Channels
^FCHANS
^FCMTMS
^FDAC
^FHVER
^FIPSTART
^FLASHINFO
^FLNA	Set the LNA Level of a Receiver
^FLNAS
^FMAXPOWER
^FPA
^FPAPOWER
^FPAS
^FPDMS
^FPOW
^FPOWS
^FREQLOCK
^FRSSI	Obtain the Current Channel RSSI
^FRSSIS
^FRXON	Enable a Receiver in Non-signaling Mode
^FSEGMENT
^FSTART
^FTXON	Enable the Transmitter in Non-signaling Mode
^FTXWAVE
^FWAVE	Set the Waveform in Non-signaling Mode
^FVCTCXO
^GCFIND
^GETEXBANDINFO
^GETEXBANDTESTINFO
^GETPORTMODE
^GLASTERR
^GODLOAD
^GPIO
^GPIOPL
^GTIMER
^HCSQ	Query and Report Signal Strength
^HS
^HSPA
^HSSPT
^HUK
^HVER
^HWVER
^ICCID	Query the ICCID
^IDENTIFYEND
^IDENTIFYSTART
^IMSICHG
^INFORBU
^INFORRS
^IPV6CAP
^LCSTARTTIME
^LOCINFO
^LTECS
^LTERSRP
^LWCLASH
^MAXLCKTMS
^MDATE
^MEANRPT
^MODE	System Mode Change Indication
^NANDBBC
^NANDVER
^NDISADD
^NDISCONN
^NDISDUP	NDIS-Based Dialing
^NDISSTATQRY	Query the Connection Status
^NVBACKUP
^NVBACKUPSTAT
^NVRD
^NVRESTORE
^NVRSTSTTS
^NVWR
^OPENPORT
^OPL
^OPWORD
^PCSCINFO
^PDPROFMOD
^PDPSTUB
^PFVER
^PHONEPHYNUM
^PHONESIMLOCKINFO
^PHYNUM
^PLATFORM
^PNN
^PORTATTRIBSET
^PORTCTRLTMP
^PORTSEL	Proactive Event Report Port Setting
^PRODNAME
^PRODTYPE
^PSTANDBY
^QOS
^QRYNVRESUME
^RESET	Reset the Module
^RFANT
^RSCPCFG
^RSFR
^RSFW
^RSIM
^RSRPCFG
^RSTRIGGER
^SARREDUCTION
^SCID
^SCPBR
^SCPBW
^SD
^SDLOAD
^SDOMAIN
^SDREBOOT
^SECUBOOT
^SECUBOOTFEATURE
^SETPORT
^SFEATURE
^SFM
^SHELL
^SIMLOCK
^SIMLOCKDATAREAD
^SIMLOCKDATAWRITE
^SIMST
^SN
^SPARA
^SPN
^SPWORD
^SRVST
^SRXMEAS
^SRXSET
^SRXSUBFRA
^SSEGLEN
^SSEGNUM
^SSID
^SSTART
^SSTOP
^SSUBFRAME
^SSYNC
^STGI	Obtaining Command Data
^STGR	STK Responding Command
^STSF	Configure the Mode of STK (Rawdata mode)
^STXBW
^STXCHAN
^STXCHANTYPES
^STXMODUS
^STXPOWS
^STXRBNUMS
^STXRBPOSS
^SYSCFG	System Configuration
^SYSCFGEX	Extended System Configuration Command
^SYSINFO	Query System Information
^SYSINFOEX	Extended System Information Query Command
^TBAT
^TBATVOLT
^TCHRENABLE
^TCHRINFO
^TIME
^TMMI
^TMODE	Set the Operating Mode
^TRIG
^TSCREEN
^TSELRF	Select RF Channel
^U2DIAG
^VERSION
^VERTIME
^WIBAND
^WIDATARATE
^WIENABLE
^WIFIGLOBALMAC
^WIFREQ
^WIINFO
^WIKEY
^WILOG
^WIMODE
^WIPARANGE
^WIPOW
^WIRPCKG
^WIRX
^WITX
^WIWEP
^VMSET
^WUPWD
A	B	C	D	E	F	G	H

Notes:

&W - Store User Settings ?
&V - Query Current Configuration ?
+CCLK–Return Current Time of the Module
+CGQMIN–Quality of Service Profile (Minimum Acceptable)
+CNMA–New Message Acknowledgement
+CMGS-Send Short Message
+CMGL–List Messages
+CMGR–Read Message
+CMSS–Send Message from Storage
+CMGW–Write Message to Memory
^WAKEUPCFG–Configure Module's Remote Wakeup Function by Host
^MSO–Shutdown Command
^IOCTRL-Control the GPIO
^THERMFUN–Enable or Disable the Temperature Protection Function Command
^IMEISV–Query the IMEISV
^WPDOM–Set Operation Mode (GPS)
^WPDST–Set Session Type (GPS)
^WPDFR–Set Positioning Frequency (GPS)
^WPQOS–Set QoS (GPS)
^WPDGL–Set GPS Session Lock
^GPSTYPE–Query GPS Type
^WGNSS–Set Positioning System (GPS)
^WPURL–Set AGPS Server Address and Port on the WCDMA Network
^WPDGP–Start Positioning Session (GPS)
^SOCKETCONT–Set the AGPS Socket Profile
^WPEND–Terminate Positioning Process (GPS)
^WPDIM–Delete Auxiliary Data (GPS)
^XTRATIME–Inject XTRA Time (GPS)
^XTRADATA–Inject Auxiliary XTRA Data (GPS)
^WNICT–Set NI Response (GPS)
^GNSSCNO- Request GPS CN0
^PWRCFG–Configure the Maximum Tx Power
^PWRCFGON–Enable the Maximum Tx Power Configuration
^ANTMODE–Set Operation Mode of Main and AUX Antennas
^CUSTNVCLR–Clear Customer Nonvolatile Value


URC:
+CMTI - Unsolicitedly Present of Message Arrival Indication
^SMMEMFULL–Message Memory Full
^IMEISV–Query the IMEISV

+CDSI–Unsolicitedly Present of Newly Received Message Status Report
+CMT–Unsolicitedly Present of New Message Reported Directly
+CDS–Unsolicitedly Present of New Message Status Report Reported Directly
^NDISSTAT–Unsolicited Report of Connection Status
^THERM–Unsolicitedly Present of Thermal Protection Activated
^SRVST–Service State Change Indication
^HWNAT– Indicate Network Mode Change
^SIMST–SIM Card State Change Indication
^TIMESETRULT–Notify XTRA Time Injection (GPS)
^DATASETRULT–Notify XTRA Data Injection (GPS)
^XDSTATUS–Notify XTRA Data Status (GPS)
^POSEND–Report Positioning End Information (GPS)
^WNINV–Notify NI Positioning (GPS)
+CRING Indicate incoming call
+CSSI Supplementary service notifications
+CSSU Supplementary service notifications
+CMTI New SMS-DELIVER indication
+CMT New message directly deliver indication
+CDSI New SMS status report indication
+CDS SMS status report indication directly displayed
+CUSATP Unsolicitedly report a UICC proactive command
+CUSATEND Unsolicitedly report of terminating a UICC proactive command session
^ORIG Indicate the origination of a call
^CONF Ringback tone indication
^CONN Call connection indication
^CEND Call end indication
^IPSTATE Indicate TCP/UDP data link state
^TIMESETRULT Notify XTRA time injection
^DATASETRULT Notify XTRA data injection
^XDSTATUS Notify XTRA data status
^POSITION Notify positioning result
^POSEND Report positioning end information
^WNINV Notify NI positioning
+CREG Notify the current registration status
+CGREG Notify PS Domain Registration Status
^RFSWITCH Report the RFSWITCH State
+XADPCLKFREQINFO Unsolicitedly Present of Adaptive Clock Frequency Info
^SIMST SIM Card State Change Indication
^DSDORMANT Dormant State Indication (CDMA only)
^HWNAT Indicate Network Mode Change
^IPDATA Notificate Arrival Data
^SRVST Service State Change Indication
^THERM Thermal Protection Activated Unsolicited Report
^HCSQ Report system mode and Signal Strength
^HCMT Report a New Short Message(CDMA only)
^HCDS Report a New Status Report Short Message(CDMA only)
^HCMGSS Report Successful Short Message Sending (text mode)(CDMA only)
^HCMGSF Report Short Message Sending Failure(CDMA only)
^HCMGS Unsolicitedly Present of Successfully Sending a Short Message (PDU mode)(CDMA only)
^SYSSTART Unsolicitedly report module startup(Only for the HUAWEI specified client)
^NWTIME Unsolicitedly report network system time(Only for the HUAWEI specified client)
^RSSI RSSI or System Mode Change Indication (be replaced by the URC "^HCSQ")
^MODE RSSI or System Mode Change Indication (be replaced by the URC "^HCSQ")
^RSSILVL RSSI or System Mode Change Indication (be replaced by the URC "^HCSQ")
^HRSSILVL RSSI or System Mode Change Indication (be replaced by the URC "^HCSQ")
^HDRRSSI RSSI or System Mode Change Indication
(be replaced by the URC "^HCSQ")
^CRSSI RSSI or System Mode Change Indication
(be replaced by the URC "^HCSQ")
+CEREG Notify the current LTE registration status
^ANLEVEL (Only for the HUAWEI specified client)
^WPDCP (Only for the HUAWEI specified client)
^NDISEND (Only for the HUAWEI specified client)
^OTACMSG (Only for the HUAWEI specified client)
^NDISSTAT Unsolicited Report of Connection Status
^LOCCHD Unsolicited Report of Connection Status(Only for the HUAWEI specified client)
^DATAVALIDITY (Only for the HUAWEI specified client)
^WPDDL (Only for the HUAWEI specified client)
^BOOT (Only for the HUAWEI specified client)
^STIN (Only for the HUAWEI specified client)
^ECLSTAT (Only for the HUAWEI specified client)
^CSNR (Only for the HUAWEI specified client)
^SIMFILEREFRESH (Only for the HUAWEI specified client)
^WPDOP (Only for the HUAWEI specified client)
^DSFLOWRPT (Only for the HUAWEI specified client)
^ECCLIST (Only for the HUAWEI specified client)
^ACTIVEBAND (Only for the HUAWEI specified client)
+CTZV Notify the time zone is changed
^EARST (Only for the HUAWEI specified client)
+CBMI New CBM indication
+CBM New CBM directly deliver indication
^ERRRPT Specified error code indication(Only for the HUAWEI specified client)